| |
|
Some of the documents on this page are
in Adobe Acrobat PDF format for high quality print characteristics.
If you do not have the free Acrobat Reader plugin, you may download
it here.
|
|
|
|
|
|
SC-400 PreciseCoat™ Conformal Coating Jet
Highly Selective, Precise Jet Action
The SC-400 PreciseCoat™ Conformal Coating Jet is ideal for applying coating materials to highly selective areas. This solution is designed for coating small substrates or substrates with high-component density, and when there are tight tolerances between coated and uncoated areas.
The SC-400 reaches locations not accessible by other applicators, using a needle design with jetting action and fast pulse-width modulated control. Small volumes and better control of the material deliver line widths down to 1.2 mm (0.05 in.) wide. The need for masking is eliminated because the flow is so closely controlled. Film thicknesses of 15 micrometers are achievable when using solvent-based materials.
A dual-valve configuration is available if your operation requires larger area coverage in addition to highly selective coating. This configuration combines the precision of the SC-400 with the fast, wide-area coverage of other applicators, like the SC-300 or the SC-105/205 Film Coater applicators.
Additional benefits of the SC-400 make its use in production even more valuable. Multiple dot sizes can be delivered from the same applicator, yielding small volumes with good volume control. The SC-400 also allows for clearance above large components on a board, and its performance is not affected by warped substrates.
Features
- Highly selective jetting of coating materials
- Reaches locations not possible with other applicators
- Dot sizes to 1.2 mm (0.05 in.)
- Thinner film builds, to 15 µm
- Fast, up to 500 mm/sec (20 in/sec)
- Eliminates the need for masking
- Easy to disassemble and maintain
Dispensing Systems
Brochure
If you're planning to install an Asymtek piece
of equipment, please check with your
Asymtek representative for the exact dimensions. The dimensions
shown in the following
brochures are subject to change between publication dates.
back to top
|
|
|
