| |
|
Some of the documents on this page are
in Adobe Acrobat PDF format for high quality print characteristics.
If you do not have the free Acrobat Reader plugin, you may download
it here.
|
|
|
|
|
|
Axiom™ X-1032 Dual-Lane Dispensing System
 The Axiom X-1032 high-volume dual-lane dispensing system provides exceptional accuracy and reliability for selectively jetting traditional flux and no-clean solder fluxes, and for other precise coating applications. Throughput increases of 60- to 85-percent are achievable with the Axiom system’s dual lane, multitasking capabilities.
Flux is used during the reflow process to remove oxides from metal surfaces to be soldered, enhance wetting, and protect against re-oxidation. In flip chip assembly, flux is also used to mechanically hold the die to the substrate during the assembly process prior to reflow.
Today’s large FCIPs (flip chip in package) with lower bump heights make jetting preferable to stencil printing and dipping, which is difficult to control with high viscosity materials and thinner coating requirements ( < .075 mm). Selective flux jetting from Asymtek provides a high-speed, highly adaptable process for flux jetting virtually any pattern while maintaining good edge definition (0.5 to 1.5 mm), minimizing the overspray associated with other spraying techniques.
Configured with Asymtek’s DJ-2200 DispenseJet® valve with coaxial air technology, the Axiom X-1032 is the ideal system for jetting ultra-thin film builds. Jetted flux followed by a pulse of air ensures 100-percent coverage with consistent ultra-thin film builds in the 5- to 35- µ m range, depending on the material. The Axiom system is also configured with Asymtek’s Fluidmove® for Windows® XP (FmXP) software. The FmXP software is easy to use and provides precise control of the dispensing pattern.
The Axiom’s dual lane configuration allows parallel processing on two lanes for continuous dispensing, eliminating lost time in non-dispensing activities such as substrate loading/unloading. For ultimate process flexibility, the dual lane conveyors are independently controlled, allowing different sized substrates and dispense patterns to be processed in each lane. The programmable chain belt conveyors allow for a variety of process carriers, including lead frames, Auer® boats, and custom carriers.
The fully enclosed, vented system includes safety interlocks and an emergency stop. The Axiom system interfaces with other equipment upstream and downstream using SMEMA-standard hardware and software protocols.
Features
- Asymtek’s dual lane capability provides a 60- to 85-percent increase in throughput over single lane systems
- Asymtek’s DJ-2200 DispenseJet® valve with coaxial air technology enables thin flux wet film builds as low as
5 µm
- Selective flux jetting provides excellent edge definition (0.5 to 1 mm), minimizes flux residue, and reduces or eliminates cleaning
- FmXP software controls the amount of flux jetted to accommodate different pitch flip chips
Recommended Applications
Productivity Enhancements
- DJ-2200 DispenseJet® Non-Contact Flux Jet
- Process Development Hot Plate
- SECS/GEM Interface Software
Brochure
| If you're planning to install an Asymtek
piece of equipment, please check with your Asymtek representative
for the exact dimensions. The dimensions shown in the following
brochures are subject to change between publication dates.
|
back to top
|
|
|
