| DV-6000
Pump |
Recommended
New Pumps |
Description
|
| DV-6221 |
DV-8321-CL8 |
- Medium shot size applications, including
SMA and solder paste
|
| DV-6321 |
DV-8321-CL8 |
- Medium shot size applications with abrasive fluids such
as cavity fill encapsulation materials 50-200 mg.
|
| DV-6222 |
DV-7222-CF1
DV-8222-CL1 |
- Small shot size applications like solder
paste and silver epoxy
|
| DV-6322 |
DV-8322-CL8 |
- Small shot size applications with abrasive fluids such
as underfill and cavity fill encapsulation materials <50mg.
|
| DV-6422 |
DV-7124
DV-7222 |
- Small shot size applications with certain
pastes and epoxies that are prone to separate
|
| DV-6231 |
DV-8331-CL8 |
- Large shot size applications with abrasive fluids such
as cavity fill encapsulants >100mg
|
| DV-6121 |
No
replacement |
- Good for fluids that are incompatible with
anodized aluminum, like uv cure adhesives
|
|
DV-7124-CF1 |
- Very small shot sizes of solder paste or silver epoxy
- Very low flow rate
|
|
DV-8422-CL9-19 |
- Very large shot sizes
of lid seal, thermal grease
- High flow rate
|
